Sold

1995 Illig RDM 45/3 1773


Hours: 18,423 | Maximum forming area: 450 x 170 mm | Height of formed part - negative: 30 mm | Height of formed part - positive: 15 mm | Max sheet width: 480 mm | Max material thickness: 0.8 mm | Min materia...

Sold

2002 Kiefel KVH 83


Temperature range: 25-150 °C | Max material width: 830 mm | Film storage: 14 m | Heating capacity: 15 kW | Voltage: 3 x 400V x 50Hz | Notes: All details are subject to change and/or errors. All equipment is ...

Sold

1993 Illig RV 74


Hours approx: 22700 | Stations: Forming, Cutting and Stacking | Maximum forming area: 700 x 500 mm | Minimum forming area: 400 x 250 mm | Depth of draw above-below: 120 / 40 mm | Maximum material thickness: ...

Sold

2014 Illig VHW 90/4b 1757


Notes: All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale. | Approx weight: 2,500 kg | Max material width: 900 mm | Total connected load: 50.4 kW

Sold

1998 Gabler M91 1776


Delivery date: September 2019 | Max forming area: 700 x 345 mm | Max depth of draw: 150 mm | Max material width: 750 mm | Punching force: 350 kN | Notes: All details are subject to change and/or errors.All e...

Sold

2008 Cumberland 40100 1788


Max sheet width: 110 mm | Mouth height: 40 mm | Motor: 38 kW | Notes: All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Sold

2007 Krauss Maffei KMD 2 50VL 1784


Materials: PVC | Output: 130 kg/h | Motor power output: 45 kW | Notes: All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Sold

2007 Krauss Maffei KMD 90-32/P 1783


Materials: PVC | Output range: 180-390 kg/h | Motor power output: 44 kW | Max screw torque: 18000 Nm | Max screw speed: 22 min-1 | Screw length l/d: 32 | Screw diameter: 90 mm | Screw heating & cooling: Inte...

Sold

1996 Reifenhauser 1751


Notes: All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale. | Power: 3x400V 50Hz | Materials: PS and PP | Winder type: Jumbo rolls | Max ps output: 650...

Sold

2005 Illig RDK 80 1755


Notes: All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale. | Stations: In Mould Cutting only | Hours approx: TBC | Depth of draw: 120 / 120 mm | Formi...


This website uses cookies to ensure you get the best experience on our website.
Agree