2007 Kiefel KMD 52B


2007 Kiefel KMD 52B


2007 Kiefel KMD 52B Machine Specification:

Roll unwinder is from a 2007 KMD78, can handle rolls up to 1,000kg and 1000mm diameter.

Refurbished Kiefel preheater available with the machine. (shaft bearings, shaft rubber coating, heaters, thermocouples, and sensors. Done 15 months ago)

Upgraded chain lubrication module, now works from a tank with inbuilt pump at the rear of the machine to avoid needing costly oil canisters. 

Upgraded auto lubrication system from Lincoln, runs off the machine cycle counter and connected to all the oem manual grease points. 

3 stations - Forming (including BFS), Cutting/punching and Stacking (no robot). 


Top and bottom knife heaters

Top and bottom plug assist

New plug assist motors, top and bottom. (From SEW, exact oem replacements, one replaced 7months ago, the other 5months ago)


New toggle bearings for both forming and cutting stations (Done 18months ago)


Upgraded A/B stacking to allow A/B stacking perpendicular to the chain direction as well as the standard along the chain direction. (Pneumatic and changeable via a switch on the stacker that then mimics the original A/B). Both can be used but not simultaneously. 

New stacker motor, gearbox and rack assembly (from SEW, replaced 3 months ago) 

Max foil width is 600mm, max chain spread is 610mm. 


This machine is in perfect working order and is kept very well maintained with monthly, quarterly, and yearly checks. 

It was purchased new from Kiefel by the owner and has been run in a temperature controlled clean room it’s entire life. 


ModelKMD 52B
Approx hours40,000
Delivery dateImmediately
Max tool dimensions540 x 420 mm
Maximum forming area520 x 400 mm
Minimum forming area260 x 250 mm
Depth of draw120 mm +/-
Max film width600 mm
Max dry cycles / min60
Operating pressure6 bar
Approx Dimensions9700 x 2200 x 2600 mm (L x W x H)
Approx Weight10,000 kg
NotesAll details are subject to change and/or errors.All equipment is subject to availability and/or prior sale.