Sold

Other Thermoformers

Sold
Used 2003 TFT FCS 750H

2003 TFT FCS 750H


Stations: Forming, Cutting and Stacking | Max Tool Size: 750 x 530 mm | Hours approx: TBC | Depth of draw: 120 / 120 mm | Max material width: 780 mm | Max Sheet Thickness: 1.8 mm | Max mould closing force: 5...

Sold
Used 2000 Illig RV 53b

2000 Illig RV 53b


Approx hours: 73,787 | Stations: Three | Delivery date: Immediately | Maximum forming area: 500 x 350 mm | Minimum forming area: 300 x 100 mm | Depth of draw: 100/40 mm | Max film width: 550 mm | Operating p...

Sold
Used 1993 Illig RV 74

1993 Illig RV 74


Photo only used for indication purposes. Stations: Forming, Hole Punching, Cutting and Stacking | Maximum forming area: 700 x 500 mm | Minimum forming area: 400 x 250 mm | Height of forming above-below materi...

Sold
Used 1997 GN 2220C

1997 GN 2220C


2004 GN Up-stacker also included. Max forming area: 560 x 508mm | Max depth of draw: 125mm | Cutting Length - All other materials: 6350mm | Max Sheet Width: 595mm | Sheet thickness range: 0.15 - 1.0mm | Max d...

Sold
Used 1998 Illig RDK 80

1998 Illig RDK 80


Approx Hours: 40,200 | Delivery date: Immediately | Stations: Three - In Mould Cutting / Cutting / Stacking | Max forming area: 760 x 575 mm | Max form/punch area: 740 x 555 mm | Depth of draw: 120 / 120 mm

Sold
Used 2002 GN 3021C

2000 GN 3021C


Max forming area: 560 x 508mm | Max depth of draw: 125mm | Cutting Length - APET: 3810mm | Cutting Length - All other materials: 6350mm | Max Sheet Width: 595mm | Sheet thickness range: 0.15 - 1.0mm | Max dr...

Sold
Used 2008 GN 3021C

2008 GN 3021C


Max forming area: 560 x 508mm | Max depth of draw: 125mm | Cutting Length - APET: 3810mm | Cutting Length - All other materials: 6350mm | Max Sheet Width: 595mm | Sheet thickness range: 0.15 - 1.0mm | Max dr...

Sold
Used 2002 GN 3021C

2002 GN 3021C


Max forming area: 560 x 508mm | Max depth of draw: 125mm | Cutting Length - APET: 3810mm | Cutting Length - All other materials: 6350mm | Max Sheet Width: 595mm | Sheet thickness range: 0.15 - 1.0mm | Max dr...

Sold
Used 2009 Illig RV 74c

2009 Illig RV 74c


Approx hours: 29,776 | Stations: Three | Delivery date: Immediately | Maximum forming area: 704 x 515 mm | Minimum forming area: 400 x 250 mm | Depth of draw: 120/40 mm | Max film width: 760 mm | Sheet thick...

Sold
Used 2005 Illig RV 74b

2005 Illig RV 74b


Approx hours: 41,350 | Stations: Three | Delivery date: Immediately | Maximum forming area: 704 x 514 mm | Minimum forming area: 400 x 250 mm | Depth of draw: 120/40 mm | Max film width: 760 mm | Sheet thick...

Sold
Used 2004 Illig RV 74b

2004 Illig RV 74b


Approx hours: 42,814 | Stations: Three | Delivery date: Immediately | Maximum forming area: 704 x 514 mm | Minimum forming area: 400 x 250 mm | Depth of draw: 120/40 mm | Max film width: 760 mm | Sheet thick...

Sold
Used 2011 Illig RV 74 c

2011 Illig RV 74 c


Approx hours: 7,050 | Stations: Three | Delivery date: June 2020 | Maximum forming area: 704 x 515 mm | Minimum forming area: 400 x 250 mm | Depth of draw: 120/40 mm | Max film width: 760 mm | Sheet thicknes...

Sold
Used 1999 Illig RV 53

1999 Illig RV 53


Approx Hours: 32714 | Stations: Forming and Cutting | Maximum forming area: 500 x 350 mm | Minimum forming area: 300 x 100 mm | Height of forming above-below material: 100 / 30 mm | Maximum cycles-minute: 20

Sold
Used 1994 Illig RDM 70K

1994 Illig RDM 70K


Thermoformer is supplied with: Stacker Illig rs 75 Grinder available at an extra cost. Disconnected from Power Max forming area: 680 x 280 mm | Depth of draw: 150 / 15 mm | Max material width: 730 mm

Sold
Used 2006 Kiefel KMV 75D

2008 Kiefel KMV 75D


Delivery date: September 2022 | Stations: Three | Blow Box: Not fitted | Maximum forming area: 750 x 540 mm | Minimum forming area: 400 x 250 mm | Max tool dimensions: 766 x 556 mm | Depth of draw: 150/50 mm

Sold
Used 2009 OMG OMF/PVE 112 PN-M

2009 OMG OMF/PVE 112 PN-M


Max Forming area (L x W): 1400 x 800mm Min Forming area (L x W): 300 x 300mm Max.positive and negative depth 150 mm Max. Sheet width 840 mm Number of stations: 3 Product type: Container Feedi...

Sold
Used 2004 Kiefel KMV 50D

2004 Kiefel KMV 50D


Approx hours: 16,300 | Delivery date: Immediately | Maximum forming area: 500 x 350 mm | Minimum forming area: 300 x 100 mm | Max tool dimensions: 516 x 366 mm | Depth of draw: 120/40 mm | Suitable materials...

Sold
Used 1999 Illig RDKP 72g

1999 Illig RDKP 72g


Delivery date: Immediately | Stations: Forming, Cutting and Stacking | Max forming area: 760 x 545 mm | Min Forming Area: 300 x 100 mm | Depth of draw: 120 / 120 mm | Max mould closing force: 200 kN | Max cy...

Sold
Used 2011 Illig RV 74c

2011 Illig RV 74-c


Approx hours: 15,110 | Stations: Three | Delivery date: June 2022 | Maximum forming area: 704 x 514 mm | Minimum forming area: 400 x 250 mm | Depth of draw: 120/40 mm | Max film width: 760 mm | Sheet thickne...

Sold
Used 2005 Kiefel KMD 75B

2005 Kiefel KMD 75B


Delivery date: Immediately | Stations: Forming, Cutting, Down Stacker | Maximum forming area: 750 x 540 mm | Minimum forming area: 380 x 270 mm | Depth of draw: 150/150 mm | Suitable materials: PS, OPS, EPS,...

Sold
Used 2006 Kiefel KMD 75B

2006 Kiefel KMV 75D


Approx hours: 30,000 | Delivery date: Immediately | Maximum forming area: 750 x 540 mm | Minimum forming area: 400 x 250 mm | Max Tool Size: 766 x 556 mm | Depth of draw: 150/50 mm | Suitable materials: PS, ...

Sold
Used 2001 Illig RV 53b

2001 Illig RV 53b


Approx hours: 47,000 | Stations: Three | Delivery date: January 2022 | Maximum forming area: 500 x 350 mm | Minimum forming area: 300 x 100 mm | Depth of draw: 100/40 mm | Max film width: 550 mm | Operating ...

Sold
Used 2006 Irwin TP-LH-28-20NT

2006 Irwin TP-LH-28-20NT


Approx Working Hours: 50,340 | Max Mould Size: 1016 x 711 mm | Depth of draw: 64 mm | Material Thickness: 0.25 - 1 mm | Max Sheet Width: 762 mm | Output: 16-25 cycles/min | Heat Tunnel Length: 3048 - 5080 mm

Sold
Used 2004 TFT FCS 870 IM

2004 TFT FCS 870 IM


The sister machine is shown in the video which runs the same as the 2004 machine that is for sale. Stations: Forming Cutting and Stacking | Max Tool Size: 870 x 650 mm | Hours approx: TBC | Depth of draw: 130...

Sold
Used 2005 Kiefel KMV 50D

2005 Kiefel KMV 50D


Approx hours: 16,300 | Delivery date: Immediately | Maximum forming area: 500 x 350 mm | Minimum forming area: 300 x 100 mm | Max tool dimensions: 516 x 366 mm | Depth of draw: 120/40 mm | Suitable materials...

Sold
Used 2003 Kiefel KMD 75 BL

2003 Kiefel KMD 75 BL


Approx hours: 39,300 | Delivery date: Immediately | Stations: Four - Form / Hole Punch / Cut / Stack | Maximum forming area: 750 x 540 mm | Minimum forming area: 380 x 270 mm | Depth of draw: 150/150 mm

Sold
Used 2003 Kiefel KMD 75B

2003 Kiefel KMD 75B


Approx hours: 60,000 | Delivery date: Immediately | Maximum forming area: 750 x 540 mm | Minimum forming area: 380 x 270 mm | Depth of draw: 150/150 mm | Suitable materials: PS, OPS, EPS, PP, PE, PVC, APET, ...

Sold
Used 1995 Illig RV 53

1995 Illig RV 53


Stations: Forming and Cutting | Maximum forming area: 500 x 350 mm | Minimum forming area: 300 x 100 mm | Maximum cycles-minute: 20 | Height of forming above-below material: 100 / 30 mm | Total length incl r...

Sold
Used 1989 TFT 64 M-O

1989 TFT 64 M-O


Stations: Forming and Cutting | Max Tool Size: 720 x 525 mm | Depth of draw: 120 mm | Max material width: 740 mm | Max Sheet Thickness: 1.5 mm | Max mould closing force: 50 Tonne | Maximum cycles-minute: 30

Sold
Used 2013 WM FT INTEC 900

2013 WM FT INTEC 900


Complete Inline Thermoformed PP Cup Production Line - Equipment: - 2013 WM EDV 120 PP Extruder with 2 x EDV 80 Co-Extruders - 2013 WM FT Intec 900 Thermoformer with Stacking Basket and Granulato...

Sold
Used 2015 WM FT INTEC 900

2015 WM FT INTEC 900


Complete Inline Thermoformed PP Cup Production Line - Equipment: - 2015 WM EDV 120 PP Extruder with 2 x EDV 80 Co-Extruders - 2015 WM FT Intec 900 Thermoformer with Stacking Basket and Granulato...

Sold
Used 2008 Illig RV 74b

2008 Illig RV 74b


Approx hours: 19,500 | Stations: Three | Delivery date: Immediately | Maximum forming area: 704 x 514 mm | Minimum forming area: 400 x 250 mm | Depth of draw: 120/40 mm | Max film width: 760 mm | Sheet thick...

Sold
Used 2010 Illig RDKP 54g

2010 Illig RDKP 54g


Make Illig Model RDKP 54g Year 2010 Approx Hours 28,000 Stations Three Delivery Date Immediately Max Forming Area 560 x 410 mm Max Tool Size 585 x 435 mm Depth of Draw 120 / 120 mm Max Mat...

Sold
Used 2012 Illig RD 53d

2012 Illig RD 53d


Approx Hours: 8,986 | Delivery Date: Immediately | Stations: Forming, Cutting and Stacking | Max Forming Area: 500 x 350 mm | Min Forming Area: 300 x 160 mm | Depth of Draw: 100 / 40 mm | Max Mould Closing F...

Sold
Used 2012 Illig RD 53d

2012 Illig RD 53d


Approx Hours: 9,500 | Delivery Date: Immediately | Max Forming Area: 500 x 350 mm | Stations: Forming, Cutting and Stacking | Min Forming Area: 300 x 160 mm | Depth of Draw: 100 / 40 mm | Max Mould Closing F...

Sold
Used 2008 Kiefel KMD 78 BFS

2008 Kiefel KMD 78 BFS


Excellent Condition Three Station Kiefel KMD 78 BFS Thermoformer. Machine has low working hours and can be inspected working in production upon request. Approx hours: 18,000 | Delivery date: Immediately

Sold
Used 1994 Illig RDM 50K

1994 Illig RDM 50K


Approx Hours: 29,000 | Max forming area: 500 x 280 mm | Depth of draw: 150 / 15 mm | Max material width: 525 mm | Materials: PP / PS | Max cycles / min: 20 | Notes: All details are subject to change and/or e...

Sold
Used 2007 Kiefel KMD 52B

2007 Kiefel KMD 52B


2007 Kiefel KMD 52B Machine Specification: Roll unwinder is from a 2007 KMD78, can handle rolls up to 1,000kg and 1000mm diameter. Refurbished Kiefel preheater available with the machine. (shaft ...

Sold
Used 1989 Illig RDM 50K

1989 Illig RDM 50K


Depth of draw: 150 / 15 mm | Max material width: 525 mm | Max cycles / min: 20 | Max forming area: 500 x 280 mm | Notes: All details are subject to change and/or errors. All equipment is subject to availabil...

Sold
Used 1999 Illig RDK 80S

1999 Illig RDK 80S


Delivery date: Immediately | Stations: In Mould Cutting / Stacking | Max forming area: 780 x 845 mm (S model is larger) | Max form/punch area: 743 x 815 mm (S model is larger) | Depth of draw: 120 / 120 mm

Sold
Used 2005 Illig RV 53

2005 Illig RV 53


Stations: Forming / Cutting / Stacking | Maximum forming area: 500 x 350 mm | Minimum forming area: 300 x 100 mm | Height of forming above-below material: 100 / 30 mm | Maximum cycles-minute: 20 | Total widt...

Sold
Used 2005 Illig RV 74b

2005 Illig RV 74b


Approx hours: 22,680 | Stations: Four | Delivery date: September 2020 | Maximum forming area: 704 x 514 mm | Minimum forming area: 400 x 250 mm | Depth of draw: 120/40 mm | Max film width: 760 mm | Sheet th...

Sold
Used 2000 Kiefel KMD 75 BFS

2000 Kiefel KMD 75 BFS


Approx hours: 34,590 | Delivery date: June 2020 | Stations: 4 - In Mould Cutting / Hole Punching / Cutting / Stacking | Maximum forming area: 750 x 540 mm | Minimum forming area: 380 x 20 mm | Depth of draw:...

Sold
Used 2006 Illig RV 74b

2006 Illig RV 74b


Approx hours: 22,300 | Stations: Three | Delivery date: June 2020 | Maximum forming area: 704 x 514 mm | Minimum forming area: 400 x 250 mm | Depth of draw: 120/40 mm | Max film width: 760 mm | Sheet thickne...

Sold
Used 2002 TFT FCS 870 IM

2002 TFT FCS 870 IM


Stations: In Mould Cutting and Stacking | Max Tool Size: 870 x 650 mm | Hours approx: TBC | Depth of draw: 130 / 130 mm | Max material width: 900 mm | Max Sheet Thickness: 1.8 mm | Max mould closing force: 6...

Sold
Used 1999 TFT FCS 780 IM

1999 TFT FCS 780 IM


Stations: In Mould Cutting and Stacking | Max Tool Size: 780 x 570 mm | Hours approx: TBC | Depth of draw: 130 / 130 mm | Max material width: 810 mm | Max Sheet Thickness: 1.8 mm | Max mould closing force: 6...

Sold
Used 2003 Illig HSA 50d

2003 Illig HSA 50d


Delivery date: Immediately | Approx hours: 16,600 | Maximum forming area: 500 x 300 mm | Minimum forming area: 100 x 35 mm | Positive depth of draw: 80 mm | Maximum material width: 500 mm | Maximum cycle rat...

Sold
Used 2001 Illig RV 53 Thermoformer

2001 Illig RV 53 Thermoformer


Approx hours: 15,541 | Stations: Forming, Cutting and Stacking | Maximum forming area: 500 x 350 mm | Minimum forming area: 300 x 100 mm | Height of forming above-below material: 100 / 30 mm | Maximum cycles...

Sheet Formers

Sold
Used 1989 Illig UA 200 ED

1989 Illig UA 200 ED


Make: Illig Model: UA 200 ED Year: 1989 Condition: Good Max. Forming area 1950 x 950 mm Max. Tool size 2000 x 1000 mm Max. Material thickness 12 mm Max. Depth of draw pos./neg. 700 mm with ...

Sold
Refurbished 2005 Illig UA 225

2005 Illig UA 225


Make: Illig Model: UA 225 ED Year: 2005 (Original Frame: 1990) Condition: Excellent Max Sheet Size: 2315 x 1325 mm Max Mould Size: 2200 x 1200 mm Depth of Draw: 700 mm with Auto Sheet Loader...